24 2 310 Tool kit for Removing And Installing Reverse Gear Piston

WARNING: This page is about a different variant/trim than selected.

NOTE: For disassembling and assembling transmission for "Sealing intermediate plate" job

Transmission: A4S 270R, A4S 310R

SI number: 1 22 97(239)

Order number: 24 2 310

Tool kit for removing and installing reverse gear piston

Consisting of:

1 = 24 2 311 Pressure plate

NOTE: For removing and installing spring retainer

2 = 24 2 312 Spindle with pressure plate

NOTE: Spindle M14x1.5, nut M14, pressure plate and washer / For removing and installing spring retainer

3 = 24 2 313 Guide pin (2)

NOTE: For fixing gaskets and intermediate plates on intermediate housing

4 = 24 2 314 Slip bush

NOTE: For removing piston in cylinder of intermediate plate

Fig 1: Identifying Tool Kit (24 2 310)

Courtesy of BMW OF NORTH AMERICA, INC.