Minimum set: Mechanical tools
WARNING: This page is about a different variant/trim than selected.
In conjunction with: 13 3 061 and BMW DIS
NOTE:
For pressure gauge 13 3 061 or BMW DIS for checking oil pressure
Transmission: 3 HP 12, 3 HP 20, 3 HP 22, 4 HP 22, 4 HP 24, A4S 270R, A4S 310R, A5S 300J, A5S 310Z, A5S 440Z, A5S 560Z
Storage location: B23, B24, single
Order number: 24 0 020
Oil pressure test accessories
Consisting of:
1 = 24 0 021 Pressure hose with connection
NOTE:
Pressure hose 1.7 m, connection M12x1.5 - M14x1.5 external thread/for checking the various converter pressures / Transmission: A4S 310R, A4S 270R
2 = 24 0 022 Reducer
NOTE:
For checking main pressure (3 HP 22, A5S 310Z) and clutch A (ZF transmissions) / transmission: 3 HP 22, A5S 310Z, A5S 560Z and all ZF transmissions
In conjunction with: 24 0 140
3 = 24 0 023 Pipe bend, 145 mm
NOTE:
Extended length 145 mm / Transmission: 4 HP 22, 4 HP 24
In conjunction with: 13 6 052
4 = 24 0 024 Pipe bend, 90 mm
NOTE:
Extended length 90 mm
In conjunction with: 13 6 052
5 = 24 0 025 Banjo bolt
NOTE:
M20x1.5 - M18x1.5 / For checking converter pressure / Transmission: 3 HP 12
In conjunction with: 24 0 024
6 = 24 0 026 Reducer
NOTE:
M24x1.5 - 20x1.5 / For checking main pressure / Transmission: 3 HP 20
In conjunction with: 24 0 024
7 = 24 0 027 Reducer
NOTE:
M20x1.5 - M18x1.5 / For checking main pressure (3 HP 12) and converter pressure (3 HP 20) / Transmission: 3 HP 12, 3 HP 20
In conjunction with: 24 0 024
8 = 24 0 028 Screw plug
NOTE:
M18x1.5 / For closing off oil supply lines while checking converter pressure / Transmission: 3 HP 20
9 = 24 0 029 Adapter
NOTE:
For closing off supply and return lines while checking main pressure / Transmission: 3 HP 22