11 52 020 Removing And Installing Or Replacing Fan Clutch (N62)

WARNING: This page is about a different variant/trim than selected.

Special tools required:

CAUTION: Left-hand threads.

Using special tool 11 5 050 brace against pulley and unfasten cap nut from water pump using special tool 11 5 040 .

Remove fan wheel with fan coupling from water pump.

Fig 1: Identifying Special Tool (11 5 040) And (11 5 050)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Tighten down fan impeller using special tool 11 5 040 .

NOTE: When using special tool 11 5 040 , 30 Nm on the torque wrench scale are equivalent to a tightening torque of 40 Nm.

Fig 2: Identifying Special Tool (11 5 040)

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws, detach fan from fan clutch.

Fig 3: Locating Fan Clutch Screw

Courtesy of BMW OF NORTH AMERICA, INC.