24 40 Torque converter
WARNING: This page is about a different variant/trim than selected.
TORQUE CONVERTER
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Torque converter to flywheel | M8 | 26 Nm | ||
| A4S 270R / A4S 310R / A5S 310Z / A5S 300J / A5S 440Z / A5S 560Z / A5S 325Z / A4S 200R / GA6HP26Z / GA6HP19Z | M10 8.8 | 45 Nm | ||
| A5S360/390R | M10 | 45 Nm | ||
| A5S360/390R / GA6HP19Z / GA6HP26Z / GA6HP32Z / GA6L45R | M10 10.9 | 56 Nm |