24 22 Planetary gear drive
WARNING: This page is about a different variant/trim than selected.
PLANETARY GEAR DRIVE
| Type | thread | tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Brake coupling D/G on gear box housing | A5S 310Z / A5S 560Z | M10 | ||
| Insert all screws until contact is made with screw head in each case | ||||
| center bolt | 30 Nm | |||
| both outer screws | 15 Nm | |||
| center bolt | 63 Nm | |||
| both outer screws | 30 Nm | |||
| both outer screws | 63 Nm |