18 00 020 Removing and installing complete exhaust system

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

31 2 220

WARNING: Scalding hazard!
Only perform these tasks after exhaust system has cooled down.

Support exhaust system with jack and special tool 31 2 220 and secure against falling out.

Fig 1: Supporting Exhaust System

G03310771

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Removal of the exhaust system must be carried out with the assistance of a second person.

Pull off vacuum hose (1).

Fig 2: Locating Nuts

G03310772

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew nuts.

Unfasten screws.

Fig 3: Removing Muffler Screws

G03310773

Courtesy of BMW OF NORTH AMERICA, INC.

Release nuts (1) and remove complete exhaust system.

Fig 4: Removing Complete Exhaust System

G03310774

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Replace nuts.