13 54 250 Replacing air intake hose (M54)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 BMW X5, 2006 BMW X3, 2005 BMW X5, 2005 BMW X3, and 2004 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Switch off ignition.
Release hose clamp (3).
Detach intake hose (5) from air-mass flow sensor.
Installation:
Check sealing ring (1) between air-mass flow sensor and intake hose for damage, replace if necessary.
Coat sealing ring (1) with acid-free grease.
Detach cable tie (2) of line (1) on intake hose (3).
Release clips (1).
Pull intake hose (2) out of connecting piece and remove.