11 11 Engine Block, Cylinder Crankcase M54 B22
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 BMW X5, 2006 BMW X3, 2005 BMW X5, 2005 BMW X3, and 2004 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE BLOCK AND CYLINDER CRANKCASE M54 B22 TECHNICAL DATA SPECIFICATION
| Bore hole diameter (1) | mm | 80.000+0.010 | ||
| 1. Interference (1) (only permitted for aluminum engine block with cast iron liners) | mm | 80.250+0.010 | ||
| Permitted out-of-round of cylinder bore (1) | mm | 0.005 | ||
| Permitted conicity of cylinder bore (1) | mm | 0.010 | ||
| Permissible total wear tolerance between piston and cylinder (engine operated) | mm | 0.15 | ||
|
||||