11 13 Oil Pan
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 BMW X5, 2006 BMW X3, 2005 BMW X5, 2005 BMW X3, and 2004 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
11 13 OIL PAN TIGHTENING SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Oil drain plug | M12 x 1.5 | 25 N.m | ||
| M18 x 1.5 | 35 N.m | |||
| M22 x 1.5 | 60 N.m | |||
| 2AZ Oil pan on engine block | M6 8.8 | 10 N.m | ||
| M6 10.9 | 12 N.m | |||
| N40 / N42 / N45 / N46 | M8 8.8 | Replace screws | 30 N.m | |
| M8 8.8 | 22 N.m | |||
| Oil sump, lower section to upper section | M6 8.8 | 10 N.m | ||
| N62TU | M8 | 24 N.m | ||
| M8 8.8 | 22 N.m | |||
| Oil sump bottom section to top section with microencapsulated screws | M6 10.9 | Replace screws | 12 N.m | |
| Oil sump upper section to crankcase | N62TU | M6 | 10 N.m | |
| N62TU | M8 | 20 N.m |