11 36 Variable camshaft control
WARNING: This page is about a different car, the 2014 BMW X6 M, 2013 BMW X6 M, 2012 BMW X6 M, 2011 BMW X6 M, and 2010 BMW X6 M. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - VARIABLE CAMSHAFT CONTROL
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ VANOS gear to inlet and A-camshaft (Contact surface on screw head must greased with mounting paste) | S63O 0 | M10x1 | Replace screw | |
| Jointing torque | 30 Nm | |||
| Angle of rotation | 90 ° | |||
| 2AZ Non-return valve VANOS to cylinder head | S63O 0 | M14 x 1.5 | 20 Nm | |
| 3AZ Solenoid valve holder to cylinder head | S63O 0 | M6 | 10 Nm |