11 13 Oil sump
WARNING: This page is about a different car, the 2014 BMW X6 M, 2013 BMW X6 M, 2012 BMW X6 M, 2011 BMW X6 M, and 2010 BMW X6 M. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - OIL SUMP
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Oil drain plug | S63O 0 | M18 x 1.5 | Replace sealing ring | 40 Nm |
| 2AZ Oil sump upper section to crankcase | S63O 0 | M8 | 25 Nm | |
| 3AZ Oil sump, lower section to upper section | S63O 0 | M8 | Replace microencapsulated screws | 27 Nm |
| 4AZ Oil deflector to oil sump upper section | S63O 0 | M6 | 10 Nm | |
| 5AZ Screw plug, oil channel, to oil sump upper section | S63O 0 | M24x1.5 | Replace sealing ring | 50 Nm |
| 6AZ Oil condition sensor to lower oil sump section | S63O 0 | M6 | Replace O-ring | 8.5 Nm |
| 7AZ Oil temperature regulator to oil sump upper part (control valve) | S63O 0 | M33x2 | Replace sealing ring | 100 Nm |