11 14 Case Covers
WARNING: This page is about a different car, the 2014 BMW X6 M, 2013 BMW X6 M, 2012 BMW X6 M, 2011 BMW X6 M, and 2010 BMW X6 M. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CASE COVERS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Jump guard to crankcase | S63O 0 | M6 | 10 Nm | |
| 2AZ Gear case cover to crankcase, bottom | S63O 0 | M8 | 21 Nm | |
| 3AZ Gear case cover to cylinder head, top | S63O 0 | M6 | 10 Nm | |
| 4AZ End cover (oil) to crankcase (transmission side) | S63O 0 | M6 | Observe tightening sequence (liquid sealing compound required) | 10 Nm |
| 5AZ End cover (water) to crankcase (transmission side) | S63O 0 | M6 | Observe tightening sequence (liquid sealing compound required) | 10 Nm |