65 11 075 Removing and installing/replacing DVD changer

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Follow INSTRUCTIONS FOR HANDLING OPTICAL FIBRES .

Open glovebox.

Release trim (1) at clips (2).

Installation:

Replace damaged clips (2):

Fig 1: Identifying Glovebox Trim And Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Pull out DVD changer (2) and disconnect associated plug connection.

Tightening torque 65 52 5AZ .

Fig 2: Identifying DVD Changer And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement

Release screws (1) on both sides and remove bracket (2).

Tightening torque 65 52 1AZ .

Fig 3: Identifying Bracket And Screws

Courtesy of BMW OF NORTH AMERICA, INC.