65 77 532 Removing and installing/replacing front left sensor

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary tasks

Remove RADIATOR AIR DUCT .

Release screws (1).

Remove sensor (2) and disconnect associated plug connection.

Tightening torque 65 77 6AZ .

Installation:

Replace screws (1).

Fig 1: Identifying Sensor And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: During fitting, the inscription (1) must be legible from the front.

Fig 2: Identifying Front Inscription

Courtesy of BMW OF NORTH AMERICA, INC.