65 20 035 Removing and installing/renewing roof aerial

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks

Detach EMPTY HOUSING for roof-mounted aerial.

Release screw (1) and feed out roof aerial (2) towards top.

Fig 1: Identifying Roof Aerial And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connections (1) and remove aerial (2).

Fig 2: Identifying Plug Connections And Aerial

Courtesy of BMW OF NORTH AMERICA, INC.

After installation

Stick on EMPTY HOUSING for roof-mounted aerial.