51 24 145 Removing and installing/replacing button for tailgate activation

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 323 .

Slide special tool 00 9 323 under the front edge of button (1) and lift button (1) out.

Pull button (1) out of rear lid (2).

Fig 1: Pulling Button Out Of Rear Lid Using Special Tool (00 9 323)

Courtesy of BMW OF NORTH AMERICA, INC.

Unplug connector (1) and remove button (2).

Installation note:

Perform function check with tailgate open.

Fig 2: Identifying Tailgate Activation Button And Connector

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement

Carefully release latch mechanisms (1) and remove microswitch (2).

Fig 3: Identifying Microswitch And Latch Mechanisms

Courtesy of BMW OF NORTH AMERICA, INC.