11 14 085 Removing and installing timing case cover, top right (S63)
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
Gear case cover, cylinders 1-4:
Necessary preliminary tasks:
- Remove both SOLENOID VALVES on right side.
Release screws (1).
Tightening torque 11 14 3AZ .
Remove timing case cover (2).
Installation:
Replace seal .
Assemble engine.