64 11 906 Removing and installing/renewing ventilation temperature sensor (center fresh-air grille)
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks
- Remove CENTRE FRESH-AIR GRILLE
Disconnect plug connection (1).
Turn temperature sensor (2) in direction of arrow as far as it will go.
Remove temperature sensor (2) from center fresh-air grille (4).
Installation:
On version with two temperature sensors, pay attention to lead identification (3):
- Always connect lead identification (3) on right from driver's viewpoint
Make sure temperature sensor (2) is correctly engaged in middle fresh-air grille (4).