72 12 000 Removing and installing or replacing airbag module on passenger side

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Read and comply with SAFETY REGULATIONS for handling airbag modules and pyrotechnical belt tensioners.
Incorrect handling can activate airbag and cause injury.

Necessary preliminary tasks

Clamp off BATTERY NEGATIVE LEAD
Remove INSTRUMENT PANEL TRIM

Unclip airbag lead with holders (1) from instrument panel.

Fig 1: Identifying Airbag Lead Holders

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew nuts (1).

Installation:

Replace nuts.

Tightening torque 72 12 01AZ .

Remove airbag module from instrument panel.

Fig 2: Identifying Airbag Module Mounting Nuts

Courtesy of BMW OF NORTH AMERICA, INC.