65 77 Airbag triggering control
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - AIRBAG TRIGGERING CONTROL
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Airbag control unit to tunnel middle | E70, E71, E72, E82, E84, E88 | 8 Nm | ||
| E89 | 8.5 Nm | |||
| 2AZ Sensor, A-pillar | E70 | 8 Nm | ||
| 3AZ Sensor, B-pillar | E70, E71, E72, E82, E84, E88, E89 | 8 Nm | ||
| 4AZ Sensor, front door, to inner door panel | E70, E71, E72, E82, E84, E88, E89 | 8 Nm | ||
| 5AZ Sensor, rear seat, to seat frame | E70 | 8 Nm | ||
| 6AZ Acceleration sensor to front carrier support | E70, E71, E72, E82, E84, E88, E89 | Replace screws | 8 Nm | |
| 7AZ Holder, rollover controller to rollover protection | E88 | 4.5 Nm | ||
| 8AZ Rollover controller to holder | E88 | 5 Nm |