11 65 Turbocharger and Control
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - TURBOCHARGER AND CONTROL
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Exhaust manifold to turbocharger (D80 V-band clamp). | S63 | M8 | Replace V-band clamp | 13 Nm |
| 2AZ Turbocharger to primary catalyst (D108 V-band clamp). | S63 | M8 | Replace V-band clamp | 13 Nm |
| 3AZ Heat shield to heat shield, side. | S63 | M6 x 16 | 10 Nm | |
| 4AZ Heat shield to support. | S63 | M6 x 16 | 10 Nm | |
| 5AZ Heat shield to heat shield, rear. | S63 | M6 x 16 | 10 Nm | |
| 6AZ Vacuum reservoir to crankcase / cylinder head. | S63 | M6 | 10 Nm | |
| 7AZ Heat shield to heat shield, rear. | S63 | M6 | Screw, captive | 10 Nm |
| 8AZ Heat shield, bottom, to crankcase / oil return cover. | S63 | M6 x 14 | 10 Nm | |
| 9AZ Heat shield to crankcase. | S63 | M6 x 22 | 10 Nm | |
| 10AZ Heat shield turbocharger and alternator to cylinder head. | S63 | M6 x 14 | 10 Nm | |
| 11AZ Bracket, electropneumatic pressure converter, to cylinder head. | S63 | M6x18 | 10 Nm |