11 12 Cylinder Head And Cylinder Head Cover
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CYLINDER HEAD AND CYLINDER HEAD COVER
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Cylinder head bolt | S63 | M11 x 1.5 | Replace screws. | |
| Jointing torque | 30 Nm | |||
| 1. Angle of rotation | 90 ° | |||
| 2. Angle of rotation | 90 ° | |||
| 2AZ Cylinder head bolt to gear case cover | S63 | M8 | 23 Nm | |
| 3AZ Cylinder head cover to cylinder head. | S63 | M6 | 10 Nm | |
| 4AZ Metal bracket to cylinder head. | S63 | M6 | 8 Nm | |
| 5AZ Lifting eye to cylinder head. | S63 | M8 | 22 Nm | |
| 6AZ Ignition coil cover to cylinder head cover. | S63 | M6 | 4 Nm | |
| 7AZ Non-return valve | S63 | M14x1.5 | 20 Nm | |
| 8AZ Ventilation connection | S63 | M8x1 | Replace sealing ring. | 15 Nm |
| 9AZ Oil filler neck to cylinder head cover. | S63 | M6 | Replace sealing ring. | 14 Nm |
| 10AZ Screw plug to cylinder head | S63 | M10x1 | Replace sealing ring. | 10 Nm |