24-1010 Holding sleeve

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

0491662 241010 Holding sleeve MW

NOTE: (Assembly sleeve) For removing the disc set (4-gear) and for pressing in the needle bearing in the oil pump housing (A5S 560Z) [Discontinued]

Storage Location

Fig 1: Identifying Holding Sleeve (0491662)

Courtesy of BMW OF NORTH AMERICA, INC.