31 35 Stabilizer Bar
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
STABILIZER BAR - TIGHTENING TORQUE SPECIFICATIONS
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ Retaining bar for stabilizer to front axle carrier |
E70, E71 |
M10 |
Observe repair instruction. |
56 Nm |
| 2AZ Stabilizer link to stabilizer/swivel bearing |
E70, E71 |
M12 |
Replace nut |
100 Nm |