24 00 Transmission in general
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
TRANSMISSION IN GENERAL - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Transmission to engine | ||||
| Hex screws | A4S 200R/A4S 270R/A4S 310R/A5S 300J/A5S 310Z/A5S 325Z/A5S 440Z/A5S 560Z/A5S 360R/A5S 390R /GA6HP19Z/GA6HP26Z/GA6HP32Z |
M8 | 24 Nm | |
| Hex screws | A4S 200R/A4S 270R/A4S 310R/A5S 300J/A5S 310Z/A5S 325Z/A5S 440Z/A5S 560Z/A5S 360R/A5S 390R/GA6HP19Z/GA6HP26Z/GA6HP32Z |
M10 | 45 Nm | |
| Hex screws | A4S 200R/A4S 270R/A4S 310R/A5S 300J/A5S 310Z/A5S 325Z/A5S 440Z/A5S 560Z/A5S 360R/A5S 390R/GA6HP19Z/GA6HP26Z/GA6HP32Z |
M12 | 82 Nm | |
| Torx bolts | A4S 200R/A4S 270R/A4S 310R/A5S 300J/A5S 310Z/A5S 325Z/A5S 440Z/A5S 560Z/A5S 360R/A5S 390R |
M8 | 21 Nm | |
| Torx bolts | A4S 200R/A4S 270R/A4S 310R/A5S 300J/A5S 310Z/A5S 325Z/A5S 440Z/A5S 560Z/A5S 360R/A5S 390R |
M10 | 42 Nm | |
| Torx bolts | A4S 200R/A4S 270R/A4S 310R/A5S 300J/A5S 310Z/A5S 325Z/A5S 440Z/A5S 560Z/A5S 360R/A5S 390R |
M12 | 72 Nm | |
| Torx bolts | GA6HP19Z/GA6HP26Z | M6 | 9 Nm | |
| Torx bolts | GA6HP26Z | M10 | 38 Nm | |
| Steel Torx screws | GA6HP19Z/GA6L26Z/GA6L45R | M8 | 19 Nm | |
| Steel Torx screws | GA6HP19Z/GA6HP26Z/GA6L45R | M12 | 66 Nm | |
| 2AZ Transmission to engine N51/N52/N54/N53/N52K Aluminium screws/bolts are not magnetic |
GA6HP19Z/GA6HP26Z/GA6L45R | Replace screws Jointing torque and angle of rotation must be observed without fail | ||
| GA6HP19Z/GA6L45R | M10 x 30 | Jointing torque | 20 Nm | |
| Torque angle | 90-110° | |||
| GA6HP19Z | M10 x 85 | Jointing torque | 20 Nm | |
| Torque angle | 180-200 ° | |||
| GA6HP19Z/GA6L45R | M12 | Jointing torque | 25 Nm | |
| Torque angle | 130 ° | |||
| 3AZ Reinforcement shell to transmission/extension | A4S 200R/A4S 270R/A4S 310R/A5S 300J/A5S 310Z/A5S 325Z/A5S 440Z/A5S 560Z/A5S 360R/A5S 390R/GA6HP19Z/GA6HP26Z/GA6HP32Z |
M8 | 23 Nm | |
| 4AZ Cover plate for transmission | GA6HP19Z/GA6L45R | M6 | 9 Nm |