22 11 Engine Suspension
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE SUSPENSION-TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Description | Tightening Specification | |
|---|---|---|---|---|
| 1AZ Engine mount to front axle support | E52/E85/E86 | 42 Nm | ||
| E65/E66/E67 | M8-8 | 19 Nm | ||
| E60/E61/E63/E64/E83 | M8-8 | 21 Nm | ||
| E53 | M8-10.9 | 30 Nm | ||
| E87/E90/E91/E92/E93/E70/E71/E83/E81/E82/E88/E89 | M8 10.9 | 28 Nm | ||
| E70/E71/E83 | M10 | 38 Nm | ||
| E92/E90/S65 | M10 | 56 Nm | ||
| 2AZ Engine mount to engine support arm | E60/E61/E63/E64/E65/E66/E67/E53/E83/E87/E90/E91/E92/E93/E70/E71/E81/E82/E88/E89 | M10 10.9 | 56 Nm | |
| E65/E66/E67 | M12 10.9 | 100 Nm | ||
| E70/E71/E83 | M12 | 68 Nm | ||
| E85/E86/E52 | 42 Nm | |||
| E92 | M10 | 38 Nm | ||
| 3AZ Engine support arm to engine | E60/E61/E63/E64/E65/E66/E67/E83/E87/E90/E91/E70/E71/E81/E82/E92/E93/E88/E89 | M10 8.8 | 38 Nm | |
| N51/N52/N52K/N53 | M12 | marked blue must be replaced | ||
| 1. Jointing torque | 25 Nm | |||
| 2. Angle of rotation | 105° | |||
| E60/E61/E65/E66/E67 | M8 8.8 | 19 Nm | ||
| E85/E83 | M8 8.8 | 21 Nm | ||
| E70/E71 | M10 10.9 | 56 Nm | ||
| E53 (N62/ M54) | 38 Nm | |||
| E53 (M57) | 65 Nm | |||
| N54 | M12 | N54 engine only | 66 Nm | |
| 4AZ Engine mount to mounting bracket | E65/E60/E61/E63/E64 | M8 8.8 | 21 Nm | |
| 5AZ Mounting bracket to front axle carrier | E65/E60/E61/E63/E64 | M8-8 | 21 Nm | |
| 6AZ Vibration damper to engine carrier | E70/E71 | 19 Nm | ||
| 7AZ Reinforcement plate to front axle carrier | E90/E91/E92 | M8 | 19 Nm | |
| 8AZ Support angle to engine mount or front axle carrier | E90/E91/E92 | M8 | 19 Nm |