11 31 Camshaft
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
CAMSHAFT-TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Description | Tightening Specification | ||
|---|---|---|---|---|---|
| 1AZ | Tensioning rail and guide rail, cyl. 1 to 4, to crankcase | N63 | M10x1.25 | Insert screws dry | 46 Nm |
| 2AZ | Tensioning rail and guide rail, cyl. 5 to 8, to crankcase | N63 | M8x1.25 | 20 Nm | |
| 3AZ | Guide rail to cylinder head | N63 | M14x1.5 | Replace sealing ring | 25 Nm |
| 4AZ | Sliding rail to cylinder head | N63 | M7 | 15 Nm | |
| 5AZ | Chain tensioner to cylinder head | N63 | M7 | 13 Nm | |
| 6AZ | Camshaft bearing cap to cylinder head | N63 | M7 | 15 Nm | |
| 7AZ | Camshaft step bearing cap to cylinder head | N63 | M7 | 15 Nm | |