11 8 550 Locating fixture

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

NOTE: For securing bearing strips when installing inlet camshaft.

Engine: N53, N54

SI number: 1 20 06 (299)

Order number: 11 8 550

Fig 1: Identify Special Tool (11 8 550)

Courtesy of BMW OF NORTH AMERICA, INC.

1 = 11 8 551 Press-down tool

2 = 11 8 552 Knurled screw (4 x)

3 = 11 8 553 Thrust piece (6 x)