11 6 250 Lever gauge (Puppitast)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

NOTE: With small stand for measuring tooth backlash and axial clearance at balancing shafts, camshafts and crankshafts.

Engine: M43TU, M47T2, M57T2, M67TU, N57, N63, S85

SI number: 1 04 98(304)

Order number: 11 6 250

Lever gauge (Puppitast)

Fig 1: Identify Special Tool (11 6 250)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 11 6 251 Lever gauge

NOTE: With 0.8 mm measuring range in each direction

2 = 11 6 252 Hydraulic small stand with magnetic foot

4 = 11 6 254 Support plate

NOTE: Engine: M47T2" M57T2" S85

5 = 11 6 255 Locating plate M7

NOTE: Camshaft Engine: M67TU

6 = 11 6 256 Locating plate M8

NOTE: Crankshaft Engine: M67TU