66 53 150 Removing and installing/replacing video multiplexer

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection). , see 61 35... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

Necessary preliminary tasks:

Remove trim panel for pedal assembly , see 51 45 185 REMOVING AND INSTALLING/REPLACING PANEL FOR PEDALS .
Disconnect battery negative lead , see 61 20 900 DISCONNECTING AND CONNECTING BATTERY NEGATIVE LEAD .

Disconnect plug connection (1).

Unlock catch (2) in direction of arrow and pull out control unit (3) towards bottom.

Fig 1: Unlocking Catch

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out vehicle programming and coding.