65 50... Removing and installing/replacing IR board for rear cabin monitor

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove trim for rear cabin at front and rear base , see 65 50 150 Removing and installing/replacing trim for rear cabin monitor base at front and rear .

Release electric cable (1) from guides.

Installation:

Ensure correct cable routing.

Fig 1: Releasing Electric Cable From Guides

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove IR board and disconnect associated plug connection.

Fig 2: Identifying Associated Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.