65 83 560 Removing and installing/replacing front trim for Car Communication Computer

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

12 7 192

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection) , see 61 35... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .
Risk of damage!
Place Car Communication Computer on special tool 12 7 192 (antistatic mat) and earth/ground, see.

Necessary preliminary tasks:

Remove CAR COMMUNICATION COMPUTER , see 65 83 010 Removing and installing/replacing Car Communication Computer .

Unlock retainer (1) and carefully raise front trim (2).

Fig 1: Identifying Retainer And Front Trim

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, unclip retaining lugs (2) and carefully remove front trim (1).

Fig 2: Identifying Retaining Lugs And Front Trim

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: "LIF" stands for Low Insertion Force.

Open catch of LIF plug (1) in direction of arrow and feed out LIF cable (2).

Remove front trim (3).

Fig 3: Identifying Front Trim And LIF Plug

Courtesy of BMW OF NORTH AMERICA, INC.