63 21 101 Replacing sealing frame for left or right rear light (on side panel)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove rear light , see 63 21 180 Removing and installing/replacing left or right rear light (in side panel) .
Detach sealing frame for rear light (1) completely from rear light (2).
Clean bonding surface and allow to dry.
Installation:
Make sure sealing frame for rear light (1) is correctly positioned and bonded all round on rear light (2).