52 13 040 Removing and installing/replacing outer cover on left or right front seat (normal/semi-electric)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Pull lever forward to remove:

If necessary, lever out lower locking point (1) from rear with a screwdriver.

Release screw (2).

If necessary, move seat fully forwards and upwards.

Fig 1: Releasing Screw

G04742722

Courtesy of BMW OF NORTH AMERICA, INC.

Remove trim:

Unclip at top edge
Unclip at rear towards top side
Pull on belt opening
Unlock lugs
Carefully remove trim towards front

Unfasten plug connection.

Fig 2: Removing Trim

G04742723

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement only:

Remove switch , see 61 31 203 REPLACING SWITCH COMBINATION FOR SEAT ADJUSTMENT .

Installation:

Retaining clips and tabs must not be damaged.

Fig 3: Identifying Clips And Tabs

G04742724

Courtesy of BMW OF NORTH AMERICA, INC.