LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X5 35d >> Repair and Diagnosis >> External Pages >> Different car >> Section 2097 (Body Equipment - Repair) >> Gaskets, Seals >> 51 71... Removing and installing/replacing assembly compartment partition wall >> Equipment compartment partition wall, right

Equipment compartment partition wall, right

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Release clip (1).

Release screws (2).

Remove partition wall (3).

Installation: 

If necessary, replace faulty clip (1).

Make sure partition wall is correctly positioned.

Make sure screws are installed in correct positions.

Fig 1: Identifying Partition Wall And Clip With Screws
G04791912Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals