LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X5 35d >> Repair and Diagnosis >> External Pages >> Different car >> Section 2097 (Body Equipment - Repair) >> Gaskets, Seals >> 51 71... Removing and installing/replacing assembly compartment partition wall >> Assembly compartment partition wall, middle

Assembly compartment partition wall, middle

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Remove seal (1) for engine hood/bonnet.

Release screws (2, 4).

Remove partition wall (3).

Installation: 

Make sure partition wall is correctly positioned.

Fig 1: Identifying Partition Wall And Seal With Screws
G04791911Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals