51 32 420 Removing and installing/replacing trim on front door window frame, left or right
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Open door window.
- Detach cover on door window frame in B-pillar area, see 51 32 160 Removing and installing/replacing housing cover on inner left or right door window frame .
E53 only:
- Remove outer window cavity cover strip, see 51 21 300 Removing and installing or replacing window cavity cover strip on outside of left or right front door .
Pull rubber window seal (1) out of rear window guide.
Release screws (2).
Lever out trim (3) in outward direction and feed out towards rear.
Installation:
Moisten rubber window seal (1) with water before fitting.
Make sure rubber window seal (1) is correctly seated.
Installation:
If necessary, replace faulty plastic nuts (1).
Installation:
E53 only:
If necessary, replace faulty clip (1) on trim (2).