LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X5 35d >> Repair and Diagnosis >> External Pages >> Different car >> Section 2097 (Body Equipment - Repair) >> Front And Rear Window >> 51 31...General procedure when dismantling/installing bonded window glass >> 1 General information

1 General information

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

The vehicle can be towed away or driven without a windscreen, rear window and side window.

When carrying out dismantling/installation work and during the hardening time, the vehicle must be standing on its wheels on a level floor. The windscreen, rear window and side windows are glued to the body.

This bonding will increase the torsional rigidity of the vehicle. To obtain perfect bonding, comply with the installation procedure described in the following.

scientia non olet · About LEMON Manuals