LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X5 35d >> Repair and Diagnosis >> External Pages >> Different car >> Section 2097 (Body Equipment - Repair) >> Front And Rear Window >> 51 31... Removing windscreen with "Roll Out 2000" >> Using wire starter

Using wire starter

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Bend wire end approx. 10 mm and insert in notched tip.

Pierce wire starter with uniform pressure through adhesive bead, wire end (bent part) must be positioned on window glass.

Fig 1: Using Wire Starter
G00530558Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals