Pulling cutting wire into car

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Cut off wire end (1) at an angle and thus pierce adhesive bead (2).
Wire end must be bent to window glass.

Fig 1: Cutting Off Wire End At An Angle And Thus Pierce Adhesive Bead

Courtesy of BMW OF NORTH AMERICA, INC.