Preparation work
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
- Cut off required length from cutting wire:
Window glass diagonal x 6
- The cutting wire loops must lie on top of each other in area (B).
They must not get caught up in each other. (Otherwise no possibility of cutting the adhesive bead/wire tears.)
Overlapping of cutting wire loops approx. 10 cm.
Distance from right window edge approx. 30 cm.