Underbody panelling, side

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Release clips (1).

Release screws/nuts (2 and 4).

Feed out underbody panelling (3).

Installation:

If necessary, replace faulty clips (1).

Fit clips (1) with O-rings.

Make sure underbody panelling (3) is correctly seated.

Fig 1: Identifying Underbody Panelling Screws With Nuts

Courtesy of BMW OF NORTH AMERICA, INC.