51 47 126 Replacing handle on panel for luggage compartment floor

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1).

Separate both handle halves (3) from each other at catches (2).

Fig 1: Identifying Handle Halves And Catches With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Lever (2) and spring (5) on handle recess (1) must not be missing or damaged.

Removing lock cylinder:

Remove lever (2).

Release catches (4) and remove lock cylinder (3).

Fig 2: Identifying Spring And Handle Recess With Lock Cylinder

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Following parts on handle recess (1) must not be missing or damaged:

2 Fastener

3 Springs

4 Catches

Fig 3: Identifying Handle Recess And Catches

Courtesy of BMW OF NORTH AMERICA, INC.