51 14 000 Removing and installing/replacing front BMW badge
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 9 318 , see 00 9 318 MULTIPURPOSE WEDGE .
IMPORTANT:
Risk of damage!
To avoid damaging the paintwork on the engine hood/bonnet, tape off edge areas (1) to sides of guide pins.
So as not to subject the BMW badge to excessive deformation, lever out the badge with special tool 00 9 318 at guide pins (2).
Installation:
Following parts must not be damaged or missing:
- Badge
- Guide pins
- Grommets
Adhesive tape (4)