Procedure For Using Universal Reinforcement Plate

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

The universal reinforcement plate needs to be adapted. The plate must be divided if the distance between the pins is too great.

Dimension a is between 40 and 80 mm depending on the space available.

Secure plates with N4 punch rivets.

Fig 1: Identifying Universal Reinforcement Plate Dimension

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Ensure the rivet is positioned correctly!
Rivet head is on the adhesion side!
Rivet the plate to the inside of the flange!