LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X5 35d >> Repair and Diagnosis >> External Pages >> Different car >> Section 2096 (Collision - Body Panel Repair (E71)) >> Body Repair General Information >> 41 00... Opening Welded Connections >> 2. Opening MAG Weld Seams And MIG Brazing Seams >> - Procedure

- Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Grind off weld seams with a belt or angle grinder. Do not grind the base material thin.

Use a chisel to separate the sheet metal flange and remove the component.

scientia non olet · About LEMON Manuals