36 11 121 Removing and installing/replacing an RDC trigger transmitter (front)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Partially detach front WHEEL ARCH TRIM

Disconnect plug connection (1).

Release plastic nuts (2) and remove trigger transmitter (3).

Installation:

If necessary, replace plastic nuts.

Fig 1: Identifying Plug Connection, Plastic Nut And Trigger Transmitter

Courtesy of BMW OF NORTH AMERICA, INC.