When replacing hydraulic unit

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1) and convert holder (2).

Installation:

Tightening torque 34 51 5AZ . See 34 51 SLIP CONTROL SYSTEM (DSC) .

Fig 1: Identifying Convert Holder With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Carry out programming/coding using BMW scan tool.
Adjustment of steering angle sensor . See 61 31 996 CARRYING OUT STEERING ANGLE SENSOR ADJUSTMENT .
Mix-up check of brake lines
Function check, hydraulic unit