After installation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
- Activate and fill AIR SUSPENSION SYSTEM .
- Carry out RIDE-HEIGHT CALIBRATION .
- Bleed BRAKING SYSTEM .
- Perform chassis alignment check. See 32 00 150 KDS CHASSIS/WHEEL ALIGNMENT CHECK WITH LOAD UP TO DESIGN POSITION or 32 00 155 KDS CHASSIS/WHEEL ALIGNMENT CHECK WITH RIDE-HEIGHT MEASUREMENT WITHOUT LOAD .
- If necessary, carry out INITIAL DYNAMIC DRIVE OPERATION .