Installation sequence
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
- Install rear differential with workshop lifter and special tool 24 4 050 in rear axle carrier
- Insert bolts (1) (do not tighten down)
- Insert bolt (2) from rear (do not tighten down)
- Release tightening strap, lower special tool 24 4 050 and move away
- Tighten down screws (1)
Tightening torque 33 17 1AZ .
- Tighten down screw (2)
Tightening torque 33 17 2AZ .